Business Case and Investment Decision for Waste Heat Recovery Systems (WHRS) for Ships
Publication date:
A waste heat recovery system (WHRS) can reduce fuel costs by reusing heat from sources including exhaust gases and engine cooling water. Electricity generated by an Organic Rankine Cycle (ORC) can displace part of the output from existing generators. Certain emissions costs may also decrease as a result. Whether these savings justify an investment, however, does not depend solely on the available thermal power or rated generator power.
For a reliable business case, it must be clear how much less energy the ship actually needs to generate and how much that reduction is worth. The appraisal weighs those savings against the purchase price, ship modifications and additional operating costs. Particularly in a retrofit, installation constraints and the yard schedule can account for a substantial share of total investment costs. Existing heat use, changing operating hours, emissions regulations and any tax benefits also affect the outcome. The investment decision must therefore be based on the complete, technically feasible installation and the savings that actually accrue to the investor over the remaining economic life.
Assessing the Investment on the Basis of Avoided Energy Production
Available engine heat has economic value only when it can be used on board during operation. A high exhaust gas temperature or substantial thermal power does not, in itself, provide sufficient certainty for this purpose. The gas or water flow rate, permitted heat extraction and number of suitable operating hours also determine how much energy becomes available. With electricity production, sufficient cooling must also be available, and the shipboard electrical system must actually be able to accept the electricity produced.
An ORC can deliver substantial power at a favourable design operating point, while net electricity generation during prolonged part-load operation is considerably lower. Start-up, maintenance and temporary output limits also affect the annual output. In the assessment of when investment in waste heat recovery is economically attractive, the additional energy savings over the ship's actual operating and load profile are therefore central. A larger installation is not automatically more attractive financially when its additional capacity is used only for a limited number of hours or extensive ship modifications are needed.
The selected energy application also makes a difference. Direct heat use can reduce the load on an existing heating installation when there is enough demand for heat at the temperature available. An ORC, by contrast, may be attractive when usable heat and sufficient electrical demand coincide over extended periods. Both applications can provide value, but the comparison must be based on the existing generation each option displaces and what it costs to do so. The starting point is therefore not the purchase price or the greatest available power, but the additional savings that a technically suitable installation can achieve for the ship.
Net ORC Electricity Is Not Equal to Avoided Fuel Consumption
An ORC produces electricity from available heat, but also consumes energy itself. The working-fluid pump and any intermediate-circuit pumps or additional cooling equipment require energy, while electrical conversion losses may also occur. For the fuel savings, it must therefore be clear how much net electricity the complete installation supplies to the ship and which auxiliary loads the stated output already accounts for.
The next question is which existing generation the ORC output displaces. When the load on diesel generating sets is reduced, the fuel savings depend on their original and new loads and the associated fuel consumption. A reduction in generator output does not necessarily lead to a proportional decrease in fuel consumption. The factors that determine the fuel savings from electricity production using waste heat therefore also include generator dispatch. A generating set running at a reduced load continues to consume fuel. When, under suitable conditions, a complete set can be shut down, the fuel consumption of the remaining engines also changes. In this context, the required electrical power reserve and safe operation of the shipboard electrical system remain decisive.
A particular interaction arises when the ORC uses heat from the same generating sets whose loads are reduced by its output. The lower engine load can reduce the available heat supply and thereby also affect the ORC output. The fuel savings must then be calculated for the resulting engine load and heat supply. The original heat supply must not, without further assessment, be combined with a new generator load at which that heat is no longer available in the same quantity.
The type of energy source replaced also affects the financial value. Displacing output from a shaft generator, a battery or shore power can affect fuel consumption differently from displacing output from a diesel generating set. With energy storage, it must also be established which later energy production is actually avoided. The relevant fuel savings ultimately follow from the difference in total fuel consumption with and without the WHRS, at comparable ship performance and under comparable operating conditions. Any additional system losses, such as the effect of exhaust back pressure, must also be included in this assessment.
Existing Heat Use as the Starting Point for Additional Savings
A ship may already use engine heat before a new WHRS is installed. An exhaust gas boiler may, for example, supply steam for fuel treatment or heating, while a cooling water circuit makes heat available for another thermal application. The fuel savings that these provisions already achieve form part of the ship's existing energy performance. An additional ORC must therefore not be based on a situation in which all engine heat was originally rejected unused. It must first be established how much heat is already usefully absorbed during the relevant operating modes and how much remains available for further recovery.
For determining the additional savings when waste heat is already used for other applications, the original heat supply must be compared with the situation after the WHRS is added. When a new ORC heat exchanger is installed upstream of an existing exhaust gas boiler, less heat may remain for the original steam production. If a fuel-fired boiler has to make up this shortfall, the extra fuel the boiler uses reduces the fuel savings arising from the ORC electricity.
A different heat distribution need not be unfavourable as a result. When the fuel saved by displacing generation exceeds the extra fuel used to replace the heat, additional savings may still arise. The ORC may also use heat that the existing heat users do not need during certain operating periods. The calculation must therefore take account of the actual heat demand, available temperature level and order in which heat is extracted. The same heat must not first be counted in full as existing savings and then again as additional ORC savings. The additional financial value is determined by what the new installation adds to the existing energy supply, not by the full quantity of heat or electricity that it handles separately.
The Full Retrofit Costs Form the Investment Basis
An ORC module is only one part of the installation that must function on board. The total retrofit investment also depends on the heat exchangers, pipe connections, cooling provisions, electrical connections and ship modifications needed for the module to be installed safely and made ready for operation. For the additional costs of a WHRS retrofit on an existing ship, it must therefore first be clear which components and work are already included in the quoted scope of supply. A supplier may, for example, supply the main module and certain heat exchangers, while the yard provides the connection to the existing engine, cooling and electrical systems.
The exhaust gas system may require modifications to piping, supports, insulation or the position of other components. An ORC condenser may also make additional pumps or changes to the ship's central cooling necessary. The electrical distribution must also be suitable for the new generator and its interaction with the existing power management system.
In addition to these technical connections, the engine-room layout, the route for bringing equipment on board and structural loads can affect the costs. A module that fits in the intended position may, for example, only be brought into position with additional lifting equipment or temporary structural modifications. Foundations, pipe routes and maintenance access must also be suitable for the complete installation. Engineering, necessary technical assessments, any ship-specific approvals, installation, commissioning and agreed performance verification also form part of the project costs, insofar as they have not already been included in the existing supply.
The yard schedule may also have financial consequences. Combining the retrofit with planned maintenance can limit the additional downtime. When the WHRS instead requires a longer yard stay or a separate period out of service, additional costs or lost operating revenue may arise. In this context, only the financial consequences actually caused by the project may be attributed to it. The budget must therefore distinguish between included equipment, additional work and provisional costs that depend on further engineering. Otherwise, a low module price may give a misleading picture of the investment needed to install and commission the complete WHRS.
How Operating Hours and Installation Costs Change the Investment Outcome
A WHRS can function technically as expected and still become less financially attractive if the ship is used differently from what was originally planned. Fewer suitable operating hours can reduce the annual net energy output, while acquisition and installation costs do not automatically decrease. In this context, it makes a difference which operating hours are lost. If the ship spends less time at engine loads at which the ORC produces substantial useful electricity, a large proportion of the expected savings may disappear. If, instead, periods are lost in which heat or electrical demand was barely sufficient, the financial effect need not be equally large. The effect of fewer operating hours or higher installation costs on the WHRS business case must therefore be determined on the basis of the actual net output per operating mode.
Higher installation costs increase the amount the project must recover. When, for example, additional foundations, modified pipe routes or more extensive cooling prove necessary, the amount required increases. This additional expenditure does not automatically deliver more electricity, so the same annual net savings must justify a larger investment. If fewer suitable operating hours and higher installation costs occur simultaneously, a larger investment must be recovered from smaller future net savings. Delayed entry into service may also shorten the period in which financial returns are realized.
The simple payback period gives an initial indication of the period in which the investment can be recovered from net savings. The net present value also takes account of the time value of future cash flows and the required rate of return. Under suitable circumstances, the internal rate of return can also be used to assess the investment.
A sensitivity analysis must primarily show how far operating hours, fuel prices, availability or project costs can change before the investment no longer meets the financial criteria. The ship's remaining economic life also counts in this assessment. Any residual value may be relevant, but must not be treated as a guaranteed receipt without evidence. In this way, it becomes clear whether the business case retains sufficient value under realistic, less favourable conditions or whether a smaller installation, a different design or a revised project schedule may be more attractive.
EU ETS and FuelEU Maritime as Separate Financial Effects
In addition to avoided fuel costs, European emissions and compliance obligations can affect the financial value of waste heat recovery. The underlying technical savings may be the same, while EU ETS and FuelEU Maritime use different bases for calculating compliance. Under EU ETS, lower fuel consumption may lead to lower greenhouse gas emissions for which emission allowances must be surrendered. The potential financial benefit depends on the emissions actually avoided within the scope of the EU ETS and the value of the emission allowances concerned. The geographical coverage of voyages and port activities is also decisive in this context.
FuelEU Maritime, by contrast, assesses the average greenhouse gas intensity of the energy consumed, on a well-to-wake basis. When the WHRS reduces fuel consumption while the relative shares of the energy sources used and their applicable emission factors remain the same, this average intensity need not change. The lower energy use can, however, affect the size of the compliance balance. In the financial effects of EU ETS and FuelEU Maritime on a WHRS business case, the original FuelEU compliance position must therefore also be assessed. A smaller deficit may require less surplus to cover it or result in a lower residual penalty. With a positive balance, lower energy use may instead reduce the size of the available surplus.
The financial value of this change depends on the actual compliance strategy. Banking, borrowing and pooling can, under the applicable conditions, affect the way in which balances are used. A change in the compliance balance therefore does not automatically represent a corresponding cash saving or loss of revenue. The weighted average FuelEU intensity may also change when the ORC does not reduce the consumption of different fuels in the same proportion. The direction of that effect depends on the energy carriers used and their applicable emission factors. There is no general intensity credit for ordinary waste heat recovery.
For the business case, the avoided fuel costs, potential ETS benefits and any FuelEU cash flows must therefore be established separately. In this context, the same financial value must not be included twice. When emission costs are already accounted for through the fuel price used or a contractual payment, this must be taken into account in the additional valuation. It must also be established which party actually benefits from the lower costs. After all, the formally responsible company, shipowner and commercial operator need not be the same party. The statutory compliance obligation and the contractual allocation of costs and savings must therefore remain separately identifiable.
Energy Investment Allowance for Maritime ORC Installations
For Dutch businesses, the Energy Investment Allowance (EIA) may provide an additional tax benefit when an ORC investment meets the applicable technical and tax conditions. However, the fact that this technology is included in the Energy List does not mean that every installation on board automatically qualifies for the EIA.
For investment commitments in 2026, the Energy List sets out a specific description of an Organic Rankine Cycle or Kalina cycle under business asset code 221102. This code concerns the conversion of waste heat into mechanical or electrical energy and mentions, among other components, a turbine as part of the installation. For the EIA eligibility of an ORC installation on a ship, it must therefore be established whether the selected system meets the asset description. An ORC with a screw expander may require a different assessment from a design with a turbine.
The origin of the heat is also relevant. The Energy List 2026 describes waste heat as heat that is not used for a useful purpose under existing conditions. When engine heat is already used for heating or other thermal applications, it must therefore be sufficiently clear which proportion was actually available unused. If the installation does not fit the specific ORC code, a generic route may be investigated under certain conditions. For an existing means of transport, business asset code 340000 may be relevant. Among its conditions is a prescribed tax payback period of at least five and no more than fifteen years. The calculation uses its own assumptions and need not have the same outcome as the commercial WHRS business case.
The investing company's tax position is also decisive. Particularly for companies operating seagoing ships, the Dutch tonnage tax scheme must be taken into account. There is no entitlement to an investment deduction for the part of the business to which this scheme is applied. A technically suitable ORC therefore does not automatically provide a tax benefit for every shipping company. For 2026, the EIA allows a deduction equal to 40% of the qualifying investment amount, subject to the applicable conditions. This is an additional deduction from taxable profit, not a direct subsidy or a 40% discount on the purchase price. The actual tax benefit depends on the qualifying costs, taxable profit and the time at which the deduction can be used.
The investment must also be notified to the Netherlands Enterprise Agency (RVO) on time. For acquisition costs, the notification deadline is generally three months after the investment commitment is made. Different deadlines can apply to production costs. A potential EIA benefit may therefore only be included as sufficiently certain financial value when the technical classification, tax position, qualifying costs and notification conditions have been assessed. As long as eligibility is uncertain, it must also be possible to assess the investment without the assumed tax deduction.
The Investment Decision Must Suit the Party Receiving the Value
A WHRS may be economically attractive for the ship as a whole, while the party financing the installation receives only part of the savings. After all, the shipowner, technical manager and commercial operator need not be the same company. When, for example, an owner invests in the ORC while a charterer bears the fuel costs, the direct fuel cost savings may accrue mainly to the charterer. Emission costs, maintenance obligations and any payments may also fall to different parties under the applicable legislation and operating agreement. The cash flow calculation must therefore be based on the financial benefits the investor can actually realize. A theoretical benefit for the whole ship must not be included as revenue for the investor without sufficiently substantiated agreements.
The remaining operating period is also important. The technical service life of a WHRS need not be the same as the period for which the current owner continues to use the ship. When a sale, engine replacement or a different fuel configuration is expected, the future energy savings and financial value may change. In the final assessment, the full investment expenditure is therefore assessed against expected net cash flows over the economic life. The direct fuel savings, potential emission costs and any tax benefit are accounted for consistently. Maintenance, major overhauls, technical availability and any future modifications also form part of the financial assessment.
When new costs or limitations become apparent during technical preparation, the original investment decision may need to be reassessed. For a project that has not yet started, the assessment concerns the full expected investment and future returns. If irreversible expenditure has already been incurred, the decision to continue or stop depends primarily on the costs and benefits that still differ between those options. After all, money already spent does not automatically make additional investment more attractive. At the same time, continuation may remain justified when the remaining costs are limited and the future savings retain sufficient value.
From Technical Possibilities to a Feasible Investment
A reliable business case requires coherent technical and financial substantiation. It must first be clear which waste heat can actually be used on board and which existing generation the recovered energy displaces. These questions belong to system selection and integration of waste heat recovery systems. It must then be established how much net electricity or useful heat the selected installation can deliver during the ship's actual operating and load profile. This estimate is covered in sizing and performance assessment of waste heat recovery systems. This energy output forms the technical basis for the financial calculation, but must still be translated into the fuel and other energy costs actually avoided.
Particularly in a retrofit, the existing ship systems affect the investment. Feasibility, maintenance requirements and applicable technical and statutory conditions are therefore assessed separately within installation, maintenance and regulations for waste heat recovery systems. In the selection of ORC-Based Waste Heat Recovery Systems (WHRS) for Ships, we work with a specialized international partner to support the technical assessment, engineering and integration of suitable systems. In this context, the stated performance, necessary connections and full scope of supply must relate to the same installation under investigation.
Within the broader subject of waste heat recovery systems (WHRS) for ships, the business case ultimately answers a different question from technical feasibility. It must be clear not only that waste heat can be recovered responsibly, but also how much additional financial value the selected installation provides over the remaining economic life. In this context, the highest-rated design need not be preferable. The decisive factors are the actual energy and compliance cost savings that accrue to the investor, less the full investment and operating costs. When these cash flows meet the financial criteria under technically realistic and sufficiently substantiated conditions, a reliable basis for an investment decision emerges. It also becomes apparent when a smaller ORC, direct heat use or a different approach to the project makes more economic sense for the ship.